THREADED FLANGES

Offered by our American Alloy Flange Division 

Threaded Flanges are used for special circumstances with their main advantage being that they can be attached to the pipe without welding. Sometimes a seal weld is also used in conjunction with the threaded connection.  Although still available in most sizes and pressure ratings, screwed fittings today are used almost exclusively in smaller pipe sizes.
A threaded flange or fitting is not suitable for a pipe system with thin wall thickness, because cutting thread on a pipe is not possible. Thus, thicker wall thickness must be chosen…what is thicker ?
ASME B31.3 Piping Guide says:
Where steel pipe is threaded and used for steam service above 250 psi or for water service above 100 psi with water temperatures above 220° F, the pipe shall be seamless and have a thickness at least equal to schedule 80 of ASME B36.10.

American Alloy Flange offers custom threaded flanges in various sizes and alloys.

Please visit our alloys page to see what alloys are available for immediate production.

DIMENSIONS

  • B16.5 / B16.47
  • ½” –8″
  • 150# – 2500#
  • Larger available per customer specifications

PRIMARY ALLOYS AVAILABLE

  • Hastelloy – C276, B3, C22, C-2000, G-30, 230
  • Alloy 20, 200/201, 400, 600, 601, 625, 800HT, 825
  • AL6XN (N08367), 904L, 310, 317L, 321, 347
  • Duplex Stainless – 2205, 2507, 255
  • Titanium – Grades 2, 7, and 12
  • Aluminum Grades – 1100, 3003, 6061 and 5083
  • Chromes-Moly – F-5, F-9, F-11 and F-22

Other material available upon request

CONTACT US

1+949-218-0026

SALES@SCIMETALS.COM

841 E WILMINGTON AVE

SALT LAKE CITY, UTAH 84106 USA