STUDDING OUTLET

Offered by our American Alloy Flange Division 

Studding outlet or pad flanges are usually designed to be installed in the inside or outside of vessels and tanks. The curving of the outlet should be ordered to fit the curvature of the shell, head, or pipe. These flanges can come in sizes from ½ inches to 24 inches, and the pressure ratings of 150# to 2500#. (All classes 150# – 300# should have a raised face of 1/16” and classes above that should be raised face. They can be manufactured in any of the alloys listed below.  A common alternative name for studding outlets is “pad flange.” To clarify, the pad flange and the studding outlet are the same part and pad flanges are not a variation of studding outlet.

DIMENSIONS

  • B16.5 / B16.47
  • ½” – 24″
  • 150# – 2500#
  • Flat bottom or head mount available Furnished to B16.5 specifications unless otherwise stated

PRIMARY ALLOYS AVAILABLE

  • Hastelloy – C276, B3, C22, C-2000, G-30, 230
  • Alloy 20, 200/201, 400, 600, 601, 625, 800HT, 825
  • AL6XN (N08367), 904L, 310, 317L, 321, 347
  • Duplex Stainless – 2205, 2507, 255
  • Titanium – Grades 2, 7, and 12
  • Aluminum Grades – 1100, 3003, 6061 and 5083
  • Chromes-Moly – F-5, F-9, F-11 and F-22

Other material available upon request

CONTACT US

1+949-218-0026

SALES@SCIMETALS.COM

841 E WILMINGTON AVE

SALT LAKE CITY, UTAH 84106 USA