ORIFICE FLANGE SET
Offered by our American Alloy Flange Division
Orifice Flanges are used with orifice meters for the purpose of measuring the flow rate of either liquids or gases in the respective pipeline. Pairs of pressure “Tappings”, mostly on 2 sides, directly opposite each other, are machined into the orifice flange. This makes separate orifice carriers or tappings in the pipe wall unnecessary. Orifice Flanges are usually ordered as a Set of Orifice Flanges
Orifice Flanges generally come with either Raised Faces or RTJ (Ring Type Joint) facings. They are, for all intensive purposes, the same as weld neck and slip-on flanges with extra machining.
The image on the right shows a set Orifice Flanges, where a Orifice Plate is mounted and a jack screw is machined. This jack screw is used to facilitate separating the flanges for inspection or replacement of the Orifice Plate and gaskets. The range of orifice flanges covers all standard sizes and ranges, and all common flange materials. Flanges are available in Welding Neck, Slip On, and Threaded form, and are typically supplied with two 1/2″ NPT tappings in each flange.
ASME B16.36 covers Dimensions and dimensional tolerances from orifice flanges (similar to those covered in ASME B16.5) that have orifice pressure differential connections. Coverage is limited to the following flanges:
Welding Neck Classes 300, 400, 600, 900, 1500, 2500
Slip On Class 300
Threaded Class 300
American Alloy Flange offers a wide variety of alloys and sizes for your Orifice Flange application.
Please visit our alloys page to see what materials are available for your orifice flange application.
Orifice Flanges generally come with either Raised Faces or RTJ (Ring Type Joint) facings. They are, for all intents and purposes, the same as weld neck and slip on flanges with extra machining.
- B16.5 / B16.47
- ½” – 24″
- 150# – 2500#
- Socket Weld or Threaded Taps Available
PRIMARY ALLOYS AVAILABLE
- Hastelloy – C276, B3, C22, C-2000, G-30, 230
- Alloy 20, 200/201, 400, 600, 601, 625, 800HT, 825
- AL6XN (N08367), 904L, 310, 317L, 321, 347
- Duplex Stainless – 2205, 2507, 255
- Titanium – Grades 2, 7, and 12
- Aluminum Grades – 1100, 3003, 6061 and 5083
- Chromes-Moly – F-5, F-9, F-11 and F-22
Other material available upon request
841 E WILMINGTON AVE
SALT LAKE CITY, UTAH 84106 USA